facebookyoutubeintuitegoogleskype
  • 3Dwall
  • 3Dwall
  • 3Dwall

Installation Steps

1.  Make sure the surface be smooth, flat, dry and clean.
2.  Plan your design. Measure and mark vertically and horizontally the area of installation.
3.  Start working from the middle of the wall to both sides.
4.  Apply the all-purpose adhesive glue (Titebond is recommend) on wall and panels, follow the instructions indicated on the glue packaging.
5.  Press the panel to ensure all its corners and edges adjoin the surface, avoid strong   pressure on the relief parts.
6.  Fill the gaps with paintable caulking (Titebond is recommend.)
7.  Brush or spray the wall by oil/water based Paint.


Tools

Tape Measuring, Gradienter,wallpaper knife,brush,glue,paint,paintable caulking.